|
temperature, airflow, humidity and CO2 Transmitters for HVAC Applications
Instrumentation for measuring/transmitting temperature, humidity, differential pressure, airflow and CO2 monitoring and control.
A quick summary of each instrument is given below, but if you need the full story, please request a copy of the product data sheet, either by phone 01767 692692, email or use the Contact us link, filling in the details as required. Thank you.
|
Dostmann new Air COntrol 3000 for monitoring & control of CO2 levels. Output actuator to open/close ventilation systems.
Measuring Range: 0...3000ppm
Accuracy: =/- 50ppm or 5% whichever is the greatest.
Adjustable alarm level, including open collector for ventilation control.
Applicable for use in public buildings such as schools, unverities, hospitals and kindergardens.
|
 |
Lufft EX certified Temperature/Humidity Transmitter model 5610.07
The 5610.07 range of intrinsically safe measurementr transducer has been developed for precision measurement in the range of 0-100% rH & -40....+ 180C.
The measurement head is approved for use in Zone 0 T6.
A voltage or current signal is available as outputs and can be freely selected using the serial interface.
Other measurement parameters are also available.
|
 |
Lufft flow transmitter with remote mounting head
Lufft flow transmitters are designed for precise measurement of air velocity (mass flow rate).
In addition to the desired measurement range, the output signal and the response time can be selected via jumpers.
Both duct-mounting and remote sensing versions are available. |
 |
|
Lufft temperature/Humidity Transmitter model 5615.xx
The Lufft 5615 series measurement transmitters were developed for the precise measurement of temperature & humidity.
Measurement transmitters are available for wall or duct mounting, with voltage or current outputs.
A snap-in mounting flange combined with a plug-in connector allows the transmitter to be replaced rapidly without complication..
Key features:
Condensation resistant
Good long-term stability
Quick exchange
|
 |
Lufft Temperature/Humidity Transmitter model 5616.xx
Housing complies with IP65
3 part housing facilitates simple installation and rapid exchange of the sensor unit for service purposes.
Good long term stability
Temperature range -40.....+60C
Remote sensor version covers a temperature range of -40....+120C.
Field calibration is easy to perform.
Option for local display of measured values
|
 |
Lufft Temperature/Humidity Transmitter model 5618
Plug in probes that can be exchanged rapidly are the key benefit of this range.
Smart probe technology....caliibration data retained within the probe.
Working temperature: -40.......+60C.
For restricted mounting space or higher temperature applications up to +80C, and extension plug in cable is available.
Rail mounting possible in accordance with DIN EN 50022.
Optional local display of measured values.
|
 |
Chino HN-C Temperature/Humidity Transmitter
| |
|
|
The Chino HN-C series is reliable and accurate temperature/ humidity meter with the measuring humidity range of 0 to 100%rH by using a newly developed humidity sensor.
Models with temperature output of 3-wire type Pt100 are available.
Wall-mounting type, separated type and insertion type are prepared for various applications.
A heat-resistive separated type is available for use in environments of -40 up to 180°C.
|
|
|
 |
| page 2 of 2 <1 |
Contact
us today if you require further information about any of these
products |
Ex certified humidity transmitters models are available for hazardous area applications.
The Aircontrol 3000 is ideal for HVAC applications where carbon dioxide levels need to be monitored & controlled in public buildings such as schools and offices.
5 Swan Lane, Sandy, Beds, SG19 1NE
Tel: (01767) 692692 Fax: (01767) 691831
|
