Building Moisture Meters & Damp Meters

Building Moisture Meters/Damp Meters
The T200 is a professional hand-held instrument for building climate checks in living spaces, offices, production areas and storage rooms.
The T250 combines A thermo-hygrometer, laser pyrometer and dew point alarm in just the one unit. Measure surface temperature with the built in infrared pyrometer or automatically calculate dewpoint surface temperature. The dewpoint alarm enables rapid surface scanning of walls to detect areas requiring remedial attention.
The T500 is a professional hand-held measuring instrument for the precise determination of the moisture content of wood and soft building materials using the resistance method. Measure wood moisture accurately by applying the correct wood species calibration curve obtained from the wood species compendium supplied with the instrument. Correction of surface temperature/ambient temperature difference by inputting the surface temperature. When tougher materials require the use of a "hammer" type probe etc., the T500 has an optional adapter kit to connect all types of resistance electrodes. Electrodes
Using the TS adaptor set and the corresponding connecting cable you can connect all MultiMeasure resistance electrodes to the T500 for measuring wood and building moisture, greatly extending the useability of the T500 and making your investment go further
The T600 is a professional hand-held instrument for rapid non-destructive measurement of sub-surface relative moisture content. By means of microwave technology it is possible to detect distributions of moisture content at a penetration depth of up to 300 mm. Another advantage of the method is its independence from the level of salt content present in the material. It therefore makes no difference to the microwave technique whether an older or a new building is being measured.
The T650 is a professional hand-held instrument for fast, non-destructive determination of relative moisture content distributions in areas up to a depth of 4 cm from the surface. Built in variable alarm for rapid scanning of large surface areas.
	P1 OF 3 > P2

Trotec offer a wide range of hand held moisture meters for building surveyors, industrial flooring contractors, timber producers and building pathologist, including the traditional 2 pin resistive type measuring device, non intrusive ball head capacitance probes for surface measurement and a microwave sensor for deeper measurement. For engineers wanting just one instrument to cover may applications, the T2000S has both a resistive BNC input for resistance probes and also a digital SDI input for special digital SDI probes, thereby permitting measurement of many engineering parameters such as temperature, relative humidity, airflow, wood moisture (incorporating wood species calibration curves & temperature correction) and relative moisture. The T250 provides Surface & dew point temperature calculation and relative humidity available in one instrument. A wide range of accessories/resistance probes are available for use with either the T500 or T2000 series.

moisture METERS & Damp meters for building Pathology, INDUSTRIAL FLOORING CONTRACTORS & wood

processing Mills

Building Moisture Meters/Damp Meters