Multifunction Measuring instrument for building surveyors, Wood Processors and HVAC Engineers

The T2000E/S series multi-function indicator offers an alternative to the traditional Protimeter & has the ability to connect both resistive sensors(S model)for measuring percentage moisture content of wood & also soft building materials & by connection of SDI probes, air temperature/humidity, airflow (using the hot wire principle), relative surface and sub surface moisture values (using capacitive / microwave sensors)and also trace gas when purging piping systems with hydrogen trace gas to detect pipe leaks.

A quick summary of this multi function instrument is given below, but if you need the full story, please request a copy of the product data sheet, either by phone(01767 692692), email or use the Contact us link, filling in the details as required. Thank you.

Multifunctional measuring instrument Trotec T2000
The Trotec T2000 device is used for classic applications in industrial construction diagnostics and for many areas in the building trade by screed floor layers, tillers, painters and carpenters, who need to measure the present moisture content of floors, walls & timber. Built -in wood species calibration curves to accurately measure specific wood types and allows for temperature correction using an externally connected Pt100 surface probe.
A wide selection of environmental measuring probes that connect to the T2000 indicators SDI port. Traditional resistance type moisture probes can also be connected to the standard BNC connector   See page 3 for details on using the T2000 indicator for low cost hydrogen leak detection when checking pipe weld/joint integrity.

Manufactured in Germany.

The Trotec T2000 design follows the thinking that instead of having many measuring instruments for separate applications it would be better to have a single measuring instrument for many measurement applications.

With the T2000, flexibility begins with the choice of device, as there are 2 models available:

The T2000S will equip you for the most diverse measurement applications because you can connect it to all sensors in the "MultiMeasure" range & also compatible non-Trotec sensors & electrodes, making it future proof for new probe developments

The T2000E is the cost effective solution for all users who do not need the BNC connection to attach passive electrodes according to the resistive  method of measurement.

One measuring instrument for the following measurement parameters:

Air humidity, wood moisture, building moisture, moisture alarm, material moisture, equilibrium moisture, dew point, air temperature, material temperature, wood temperature, surface temperature, food temperature, gasses temperature, bulk material temperature, liquids temperature, airflow speed & detection of trace gas.

Contact us today if you require further information about these products            Page 2 of 3   > P3