Hydrogen Trace Gas Measurement

A quick summary of this economical hydrogen trace gas measurement systems given below, but if you need the full story, please request a copy of the product data sheet, either by phone(01767 692692), email or use the Contact us link, filling in the details as required. Thank you.

The T800 SDI sensor enables non-destructive location of the highest concentration of hydrogen in the measurement area, for example for locating cracks and leaks in pressure vessels, pipes, tanks etc.

The size of the test object is irrelevant here, since the sensor system’s high resolution accuracy and measurement range from 0 to 1000 ppm H2 allow it to detect even the smallest concentrations of hydrogen from 1 ppm H2.

Acoustic & numeric measured value display:

Rising & falling hydrogen concentrations are indicated during the measurement by an acoustic indicator in the sensor handle & also by the numerical display value on the T2000 indicator.

The high performance rechargeable battery integrated in the Battery Pack enables continuous mobile use of the sensor system for approx. 4 hours.

Additionally, a MultiMeasure Holster 5 is included in the scope of supply. This carrying bag with shoulder strap and belt loop is fitted with a flap for storing a sensor & one pocket each for the T2000 & the battery pack.

Trotec T2000 plus T800 SDI trace hydrogen detection probe kit

low cost measuring instrument for hydrogen trace gas leak detection

A much lower cost system for measuring trace hydrogen gas than previous traditional systems available. The T800SDI probe in conjunction with the T2000 indicator is a major technological breakthrough for measuring trace hydrogen gas leakage down to 1ppm.